Welcome to MakerHome




We've completed our yearlong print-a-day project!
All new material is now at Hacktastic: www.mathgrrl.com


Tuesday, January 28, 2014

Day 155 - Menger slice

Today we printed owens' Diagonal Cut Menger Sponge design from Thingiverse. If you sliced a Level 2 Menger sponge in half along a diagonal plane as shown in the picture, what would the sliced face look like? Before you scroll down, take a look at this picture and try to imagine it: If you could see the hidden diagonal face made by the slice, what would it look like? Would it have holes in it? What kind? Don't peek!


The answer is: Whatever you said, you're wrong. Instead you get this:


Thingiverse link: http://www.thingiverse.com/make:63728

Settings: MakerWare .3mm/low, with no raft and no support. This makes a nice model but the detail on the stars could be better, so next time we'll use a finer setting.

Further reading: Making sliced Menger cubes is a popular sport. MadOverlord's design Diagonally-Sliced 3-Level Menger Sponge is a nice Level 3 version. Over at the Simons Foundation, George Hart has a nice video about slicing Menger cubes. And Gaya has a nice post on her blog A Girl with a 3D Printer about the advantages of printing Menger cubes diagonally instead of in the upright position. Printing upright/horizontally causes great sadness and an impossible amount of support to remove, but diagonal printing allows for beautiful prints without any support material at all.

2 comments:

  1. Thanks for printing this and showing it off, that's really cool! And if you're not yet Mengered-out, you might want to try another variation that I cooked up yesterday: http://www.thingiverse.com/thing:238551

    ReplyDelete
  2. I am very excited and am going to print your new design right now. I had been trying to figure out how to do exactly that, but you actually *did* figure it out! Very cool.

    ReplyDelete