Welcome to MakerHome

We've completed our yearlong print-a-day project! New projects will be posted at www.mathgrrl.com/hacktastic.

All mathgrrl designs and associated images and files on MakerHome are licensed under the Creative Commons Attribution Non-Commercial Share Alike license. If you want to use designs, images, or files outside of the terms of this license, please email request@mathgrrl.com.

Wednesday, September 25, 2013

Day 30 - Engage lightswitch

I miss ST:TNG.  So today we made a little Picard bling for our downstairs bathroom lightswitch based on zthralls' Rounded Lightswitch Cover on Thingiverse:



STL file: http://www.geekhaus.com/makerhome/day30_lightsengage.stl
Tinkercad link: https://tinkercad.com/things/lucqw93XA5v-day-30-lights-engage
Thingiverse link: http://www.thingiverse.com/thing:156486

Settings: Afinia with .2mm on "normal", 1 hour and 35 minutes, with a filament switch after the first outline of the letters (which is about 55 minutes into the print).

Technical notes: I got the Roddenberry font from Fontspace and used the Inkscape technique described in Day 27 of this blog to import the word into Tinkercad.  To put the font where Inkscape can find it on a Mac, put the .ttf font files into YourComputerName/Library/Fonts (*not* YourUserName/Library/Fonts).