Welcome to MakerHome

We've completed our yearlong print-a-day project! New projects will be posted at www.mathgrrl.com/hacktastic.

All mathgrrl designs and associated images and files on MakerHome are licensed under the Creative Commons Attribution Non-Commercial Share Alike license. If you want to use designs, images, or files outside of the terms of this license, please email request@mathgrrl.com.

Friday, January 3, 2014

Day 130 - Trilobite articulatum

Today is Thanxmas for our family! For the festivities we have a celebratory Trilobite articulatum from AuntDaisy on Thingiverse in our faux fireplace.



Settings: MakerWare .3mm/low in about 4 hours.

Technical notes: We used the "tight" files from AuntDaisy, which worked perfectly on the Replicator 2 with a translucent filament. We recommend printing without raft or support for the body and tail, but with raft and support for the head. (Our initial support-less print of the head had trailing strings on the snaps that had to be cut off, after which the head snaps were too loose to stay on the model.)

No comments:

Post a Comment