Welcome to MakerHome

We've completed our yearlong print-a-day project! New projects will be posted at www.mathgrrl.com/hacktastic.

All mathgrrl designs and associated images and files on MakerHome are licensed under the Creative Commons Attribution Non-Commercial Share Alike license. If you want to use designs, images, or files outside of the terms of this license, please email request@mathgrrl.com.

Saturday, September 28, 2013

Day 33 - Icosapillar

Of course every icosahedron jawbreaker trap needs a respectable stand.  Here is a very simple one I made in Tinkercad.  Its top is exactly the shape needed to hold the icosahedron and we filled it with rice as it printed so it would be sturdy.

STL file: http://www.geekhaus.com/makerhome/day33_icosapillar.stl
Tinkercad link: https://tinkercad.com/things/32woyc4gbuS-day-33-icosapillar
Thingiverse link: http://www.thingiverse.com/thing:157871

Settings: Afinia 3D software with .3mm shell on normal, 1 hour and 21 minutes.

Stuff you might want to change: I printed this as a shell since I thought it would be the fastest and because I wanted to put rice inside of it for weight, but the model has a flat horizontal triangular region near the top that did not print well.  If I made this again I would print it with a very loose fill and just add the rice inside the fill cells.

No comments:

Post a Comment