Welcome to MakerHome

We've completed our yearlong print-a-day project! New projects will be posted at www.mathgrrl.com/hacktastic.

All mathgrrl designs and associated images and files on MakerHome are licensed under the Creative Commons Attribution Non-Commercial Share Alike license. If you want to use designs, images, or files outside of the terms of this license, please email request@mathgrrl.com.

Friday, September 20, 2013

Day 25 - Dominos

My son has been watching a lot of domino-toppling videos. Turns out dominos are kind of expensive - but pretty much the easiest thing ever to model in Tinkercad.  We made standard-sized 1 7/8 x 15/16 x 1/4 inch dominoes.


STL file: http://www.geekhaus.com/makerhome/day25_dominos.stl
Tinkercad link: https://tinkercad.com/things/adYykgAGSpg-day-25-dominos
Thingiverse link: http://www.thingiverse.com/thing:153971

Settings: On the Replicator 2, MakerWare low with no raft. On the Afinia, 3D sofware on .3mm fast with a raft.

Technical notes:  It works best if you print these so that the long skinny sides are at the top and bottom, since those are the sides that will come out the roughest.  This makes the large front and back very clean but also allows the dominos to lie smoothly when you are using them.  We tried making a few variations of dominos with gaps and holes to use less plastic, but nothing was as fast to print or as stable to use as a plain old rectangular solid.

No comments:

Post a Comment