Welcome to MakerHome




We've completed our yearlong print-a-day project!
All new material is now at Hacktastic: www.mathgrrl.com


Friday, January 31, 2014

Day 158 - One hundred fidget cubes

Actually, it's 105, counting the ones that are printing in the background. We've been making these all week; they print fairly reliably in batches of a dozen. We need to make 400 of these by mid-March for a set of conference giveaways.


STL file: http://www.geekhaus.com/makerhome/day158_fidgetcubesmall.stl
Thingiverse link: http://www.thingiverse.com/make:64083

Settings: MakerWare .2mm/standard with no raft and no support (this layer height and settings are required for the hinges and clearances to work correctly). Each batch of 12 takes a bit over four hours to print.

Technical notes: Here are the customizer settings that make this model. (This is just like the tiny example model from Day 148 except with hinge_clearance increased to 0.5.)
cube_height = 10
hinge_radius = 1.5
snub = yes
stacking_clearance = .3
hinge_clearance = .5

1 comment:

  1. Hello,

    Is there a way I could purchase a few of these cubes from you? I am always looking for fidgets and do not have a printer to make them on my own.

    ReplyDelete